Greenhouse Supplies For Every Glass House

More and more people are maintaining a greenhouse in their own yards. Most have found it a fulfilling endeavor, not just to grow plants, but to grow plants well. Thus if this interests you, then it is best to learn the basics of a greenhouse.

What Is a Greenhouse?

The greenhouse serves as the home for young and tender plants, especially those grown out of their normal season. This is mainly designed to create a proper environment for the plant and for cultivation of the same.

It is usually made with plastic or glass-paned sloping roof and walls. This way, the temperature, light and even moisture can be easily controlled to give a balanced condition encouraging to the plants.

The greenhouse is best suited to grow plants of all kinds. The usual varieties are cacti, orchids and citrus trees. This is also a very ideal venue to implement plant research.

Ideally, the natural sunlight is sufficient to supply the requirements of plants, especially in temperate regions. However, when winter comes it is necessary to supply the plants with heat and light to encourage growth. The heat usually comes from steam or hot-air circulating system.

During the summer, the panes would be covered to reduce the light intensity. The structure of the greenhouse will allow heat to be easily reduced. This is done by opening the ventilators or whitewashing the panes.

Humidity is maintained by the water supplied in the soils. When the greenhouse needs greater humidity, the floors are usually sprayed with water. For pot-grown plants, like the orchids, they are set on racks with moistened residues.

There are many aspects that make a productive greenhouse. These generally depend on the supplies installed in the greenhouse. To know what these supplies are, just read on.

What Are the Important Greenhouse Supplies?

To have a really successful greenhouse, it is important to have the proper supplies and accessories to put in it. Listed below are several important greenhouse supplies.

1. Ventilation

This is the most important supply you can not miss out on your greenhouse. It serves to purposes, to provide carbon dioxide to plants and to cool the greenhouse. Without this, the greenhouse might just be simply your furnace.

The greenhouse is really storing the heat coming from the sun during the day, creating a warmer environment inside the greenhouse compared to the outside. Thus the ventilation fan system will be helpful in bringing in fresh and cooler air inside.

2. Heating System

The heating source is important too, especially during the nighttime and for the cold seasons to come. Generally, the heat supplied by the sun is stored by the greenhouse. At night, the heating systems will serve as the heat source.

This can be fueled by wood, gas, oil or even electricity. The choice simply depends on whatever type of fuel can be available in the locality as well the costs.

Some make use of electric heaters for smaller greenhouses. This should be treated with extra caution. It is not supposed to be exposed or be in contact to water to avoid any electric shock.

3. Greenhouse Thermometers

It is not sufficient that you provide temperature in the greenhouse. You have to be able to control and maintain the proper temperature. The only way you can do this is to get the min/max thermometer. This records the high and low temperature of the greenhouse.

What is at stake is the valuable data that can help you determine if the heating or cooling equipment is working correctly.

4. Fog System and Watering System

Mist and fog systems are useful in any serious greenhouse. It helps in maintaining the humidity level. A good amount of humidity can also help reduce the need for water supply.

When it comes to watering the plants, it will have to depend on the type of the plant. The regular wand can be used on the average grown plants. The drip system is best for watering larger plants. This is also a good way to save on water.

For seedlings, it is ideal to use a watering system with small sprinklers, or even misting systems. Using the regular hose or wand will simply disturb the soil.

5. Lighting

Lighting is also very important for growing plants. This will serve as the artificial sun, especially when the season does not give much heat, light and sun.

6. Shading

Shades come in handy during the hot summer. They block a certain part of the rays of the sun from entering the greenhouse. This is to avoid too much heat and sunlight on a dry season. The shade is also very helpful to some plants that grow best when screened from the direct sun.

7. Flooring and Benches

The flooring details will be for the benefit of the greenhouse owner. It can be aesthetic as it polishes the image and ambience of the greenhouse. It can also be functional. It is best to use non-skid surface so there will be not much worry during watering time. It should be easy to clean and must be able to endure the moisture in the environment.

Benches can also provide comfort. When attending to the plants, it would not hurt to do it while sitting. It is also a good place to observe and enjoy the fruits of your labor. This can also serve shading purposes to plants located beneath or just behind it.

With these important details at hand, you can easily come up with a master plan to get that perfect greenhouse for your plants.

How To Build A Greenhouse Structure?

Having a garden is not just about planting crops and harvesting it. There is a lot of work to be done to protect it from disease, pests and the weather. Since these areas are usually big and require a lot of manpower, scientists have come up with a better idea.

This plan is to grow crops in a controlled environment which makes it easy to grow crops all throughout the year. This structure which can be big or small depending on the open space in the farm is known as the greenhouse.

A greenhouse is an enclosed building that is usually made up of metal, wood and glass. These structures are designed so that the farmer can grow vegetables, flowers and fruits. The person can buy one and have it assembled in the farm or have it custom made according to certain specifications.

This new method has better results than doing farming the non-organic way such as the use of sewage, irradiation, pesticides and herbicides. This is only after tests have shown that this is a health risk that does more harm than good.

A very good example which has shown that this approach is effective is the use of hydroponics farming. This technique doesn’t require the use of soil but rather water to make the plant grow. In one experiment, scientists were able to produce more tomatoes using water than it was using soil.

Since then, other ways of doing hydroponics have been done and this has helped the productivity of the farmers.

More farmers rely on free standing greenhouses. Before these can be set up in the farmland, a good location must be determined that should provide adequate sunlight and wind to help the plants grow.

The most important thing that keeps the greenhouse standing is the frame. Developers have made versions using wood, metal, aluminum and plastic. The farmer can use any of these or have one that is a combination of any of these materials. This will depend on the budget of the farmer and the type of weather conditions there is in the area.

Plants grow because of two things. The first is the nutrients that are given to it. The second is sunlight. This makes it important for the farmer to choose the right panels.

Traditional greenhouses use glass but there are many problems when these are used as panels. Since it doesn’t protect the crops from the sun and merely lets it in, too much heat can kill the plants.

When there is a hurricane or a hailstorm, rocks and other things in most cases break the glass. This will cost a lot of money on the part of farmer to replace.

In order for the farmer to make money in selling crops than paying for repairs, designers have made panels using other things such as plastic, film and Plexiglas. This is a remarkable improvement since these are shatterproof and are able to stand severe weather conditions.

These also allow only 75% of ultraviolet light to enter the greenhouse which is the sufficient amount needed to help the plants grow.

The climate is changing and that is something that people cannot change. The effects of El Niño and La Niña have made the weather worse than the year before and this is a challenge that farmers must face.

Another thing that makes up the greenhouse is the equipment needed to keep it running. Farming in a cold climate can be difficult and since plants need warmth, a heater should also be installed.

Heaters come in big and small sizes. This can be powered by electricity, using propane gas, oil and other non-renewable resources. This device gives farmers the means to meet the demands of the people especially during the winter.

Farms have also changed thanks to technology. People don’t have to till the land anymore using rakes. Greenhouses can have timers which release water mixed with nutrients at certain times of the day helping the plants grow.

Though it is quite expensive to build a greenhouse, by selecting the proper structure, the farmer can be sure that come harvest time, there will be enough crops to sell to the market and money can be made.

Greenhouses: Gardening All Year Long

Gardening enthusiasts in the more interesting temperate climates and any place where there are four seasons are faced with great benefits as well as challenges. Because of the four seasons, gardeners are blessed with huge plant varieties conducive for planting on one or two of the seasons. In the period of a year, they are given an opportunity to plant varieties that must grow in cooler climates, and take advantage of the sunny summer to plant those that would require more exposure to the sun.

However, the seasonality of plant varieties may pose challenges to those who would rather grow plants continuously, regardless of season. This is especially true for flower and fruit varieties that require continuous sunlight for an entire year, for example, or fruit and vegetable perennials that do not bear fruit and instead shrivel up in the winter.

The response to these challenges is the creation of greenhouses or greenhouse facilities. A greenhouse is a structure made of glass or plastic that stores up the sun’s rays in order to simulate the temperatures in the spring all year long inside. By storing up heat inside a greenhouse, it allows individuals to grow plants continuously even while winter rages hard outside it. Greenhouses also go by the name glasshouses or hothouses.

The glass or plastic used in the construction of greenhouses are specially designed to have transmission qualities that will allow for the sun’s ultraviolet rays to be stored inside the greenhouse facility, providing a warm atmosphere inside, and in effect, warming the plants and the soil. A greenhouse leaves little or no openings through which the air heated by the stored sunlight can escape; leaving a small window or hatch open in a greenhouse will lead to a drastic drop in temperatures.

The general idea of a greenhouse is to protect temperature and climate sensitive plants from extreme shifts in temperature—either too hot or too cold. Maintaining a greenhouse has its own share of toil. Unlike the normal outdoor environment, which may be left to its own devices to some extent as nature creates some degree of balance, a greenhouse must be placed under strict regulation. Inside the greenhouse is a controlled environment that must simulate the outdoors without overdoing it.

For a start, it must regulate heat and humidity inside the facility. Other factors to be considered are irrigation of the plants (and sufficiency of the water available to them), light exposure, and the presence of pests and diseases must be put into great consideration. Moreover, due to the fact that the spring outdoors is sealed into a single facility, natural activities like pollination must be simulated by the introduction of species that will help make this possible. Bumblebees are the most popular option for pollinators in greenhouses.

It is recommended that greenhouses be built in the southeast portion of the property. It is in this way that the minimal sunlight available during the winter will be maximized by the greenhouse. Moreover, the house can serve to protect the greenhouse from strong winter blizzards coming in from the north. Greenhouses may be built attached to a house, or as stand-alone structures. The latter option provides more growing room for the greenhouse facility.

While it may seem that there is too much to do in order to simply start a greenhouse, gardening enthusiasts will be more than willing to vouch for greenhouses, especially if gardening is a hobby. Gardening affords even the busiest of folks to tend to their plants when they are available. With a greenhouse, the constraints of day and night, and even the seasons, are put in the backseat. Greenhouses provide the option of tending to gardens even at night because lighting and heat is consistently present inside the structure.

Moreover, it gives gardeners the ability to plant exotic flowers and fruits that are usually grown in warmer tropical areas as they are able to control light exposure and heat inside the greenhouse.

Greenhouses may even provide profit-making possibilities for gardeners. With potted plants for indoor growing and flowers growing in demand, greenhouse owners are given opportunities to sell what they grow inside their greenhouses to buffer whatever maintenance costs they incur along the way.

In the higher-latitude territories, greenhouses carry the important task of growing fresh produce in areas where the climates are harsh and cruel on plants. This is one of the biggest reasons for huge greenhouse facilities that house vegetables and fruits more than flowers and exotic foliage.

At the end of the day, greenhouses allow for the creation of a miniaturized and highly controlled natural environment to suit gardening needs. Its growing potential to provide for fresh produce in territories even with the instability of global climate proves to be a benefit that may be explored in the future.

Create a Warm and Suitable Environment for Growth with Greenhouse Plastic

Greenhouse plastic is mainly responsible for maintaining a hothouse effect within a greenhouse. Greenhouse plastic creates a warm and suitable growing environment that allows various types of plants to cultivate beautifully. It creates an enclosure that protects plants from the harmful ultraviolet rays of the sun while taking advantage of its natural warmth and light. The filtered environment produced by greenhouse plastic makes it possible for garden enthusiasts to grow luscious plants like vegetables and flowers in the cold dead of winter.

Greenhouse plastic is explicitly designed to resist wear and tear unlike conventional construction plastic that cannot filter ultraviolet rays from the sun. Greenhouse plastic is durable due to its knitted design that allows it to be cut and sized to meet the required length for a structure without fraying, ripping or tearing. The material can easily be framed around any greenhouse opening like a vent, door or windows.

Greenhouse plastic is the preferred covering of most garden enthusiasts compared to other types of greenhouse covering. At the same time costs are greatly reduced when greenhouse plastic is used since it lightweight and does not require heavy-duty structural framing. The diffusion of light into a structure constructed of greenhouse plastic is as good as that of a glass greenhouse.

Types of Greenhouse Plastic

Greenhouse plastic films are generally made of three types of plastics namely, PVC or polyvinyl chloride, PE or polyethylene and copolymers. Although, there are other types of plastic used these three are most widely used among all.

Polyethylene greenhouse plastic is available in two types, the utility grade and the commercial grade greenhouse plastic. Utility grade polyethylene greenhouse plastic is sold at local hardware stores and generally stays in good condition for practically a year. Commercial grade polyethylene greenhouse plastic last longer that utility grade PE up to eighteen months and is treated with ultraviolet inhibitors that filter out ultraviolet rays.

Copolymers are more durable and last up to three years. Innovative additives introduced into greenhouse plastic enable it to mimic the same effects of a glass greenhouse at considerably reduced costs. Polyvinyl chloride is more expensive compared to polyethylene however this type of greenhouse plastic can last up to five years. However PVC greenhouse plastic requires regular washing to prevent dust buildup from the air. It is also sold in smaller sheets of four feet by six feet wide.

How to Attach Greenhouse Plastic to Frame

Once the frame has been built it is time to put on the greenhouse plastic film to enclose the entire structure. The plastic film can either be made of polyethylene, copolymers or polyvinyl chloride depending the preference of the owner. But as much as possible choose a greenhouse plastic that is resistant to ultraviolet rays in order to make the most of the structure. Before laying the greenhouse plastic covering on the frame it is important to mask the joints of the frames with several rounds of tape or a rubber material to prevent it from puncturing the covering.

The greenhouse plastic film can be secured in place using a staple gun. A more rigid construction using 1” by 2” wood strips and wood screws can also be used to secure the greenhouse plastic film in place. The wood strips are attached to the frame so that the greenhouse plastic film does not come in direct contact with the frame.

A popular technique used by nurseries is a double-walled construction for better insulation within the structure that adds up to considerable energy savings. Two sheets of plastic are layered and framed leaving a small amount of space in between about five to eight inches wide. Air is introduced into the framed plastics that produce a dead air zone, which can efficiently insulate the entire greenhouse. Various tapes like poly patching tape and batten tape can be used to secure greenhouse plastic into place.

Poly patching tape is constructed from UV protected acrylic along with the adhesive to protect the greenhouse plastic from weakening on contact with it. This type of tape can be used to patch holes and rips that may happen to the plastic film. Its excellent holding strength and wide tape make an ideal for securing the plastic film to the frame of the greenhouse. On the other hand batten tape can be fastened the plastic film using staples or tacks to the greenhouse structure. It is also made of heavy gauge vinyl that is also UV protected.

How To Find The Easiest To Build A Greenhouse For Sale

Building a greenhouse is like building a house. You should have a well-designed plan and several things need to be taken into consideration. There are different types of home greenhouses but your choice should depend on the growing area, architecture, location and costs. Most importantly, the greenhouse that you will be building should, of course, serve its purpose of maintaining a proper environment for plants to grow.

As mentioned, there are several things that need to be considered when putting up a greenhouse. To give you some tips, here are the things to be included in the planning stage:

- Location. First thing to note in building a greenhouse is its location. The best location for a greenhouse is a place where it will get maximum sunlight. Morning sunlight is best for plants because it makes them start processing early which will result to maximized growth.

Thus, the best location is on the east side where it gets maximum morning sunlight especially from November to February. North of buildings or any major structure is the last location to be considered as it only provides little light. Also, it is best to make sure that the trees nearby the chosen location will still allow enough sunlight to reach the greenhouse.

Other things to be considered when choosing location are good drainage, location of sources of water, electricity and heat. The location should also be convenient for the owner or the caretaker as well as to the utilities.

- Greenhouse type. In general, a home greenhouse can be any of these two types – a free-standing structure or one that is attached to your house or garage. Attached greenhouses also have different kinds. One example of an attached greenhouse is the lean-to. This is a half greenhouse attached directly to one side of a house or building with doorway, if possible. This type is close to sources of heat, water and electricity and is the least expensive. However, this kind of structure also has some limitations on space, ventilation, and sunlight.

Another attached greenhouse variation is the even-span. This kind of structure has one gable end connected to a building. It provides more usable space and allows for better air flow to maintain temperature. It is also the most costly, though, among the attached ones.

The third type of an attached greenhouse is the window-mounted. This type can be attached on the east or south side of the house or building. This is a glass enclosure that extends a foot or so, which gives enough space for growing a few plants at low cost.

Freestanding greenhouses are separate structures that are not limited to a small space. Since it is set apart from an existing structure or building, it should have its own water and electricity sources as well as heating system.

When choosing the preferred structure, make sure that enough space for benches, storage, as well as future expansion is considered. The University of Maryland Cooperative Extension Service suggests a minimum area of 6 feet by 12 feet for a free-standing or even-span greenhouse.

- Structural Materials. Your greenhouse should also have a good structural foundation to withstand extreme weather conditions. There are several options for a frame and framing materials to choose from. Do-it-yourself greenhouse plans commonly use wood or metal pipes as their structural material. There are different kinds of frames available which range from simple to complex designs. Some examples of frames are Quonset, gothic, rigid-frame, post and rafter, and A-frame.

Another material to be considered is the covering for your greenhouse. Your choice of frame and covering should correctly match. Some factors to be considered to choose a good covering is its ability to trap the most amount of heat inside, as well as its life span. The different choices for greenhouse covering include regular glass, fiberglass, double-wall plastic, and film plastic.

- Foundations and flooring. Glass frames and the double-wall plastic need a permanent foundation and the plan should be provided by the manufacturers of the frame. It is also recommended for the greenhouse to be elevated a little to have enough space for water to flow. Thus, permanent flooring is not advisable as the soil may stay wet and make the floor slippery. A walkway made of gravel, concrete or stone is advised for easy access to the all the plants.

- Environmental systems. Once you now have a good plan for the structure of your home greenhouse, the next thing to consider is its proper maintenance. Aside from sunlight and heat, different elements are important to maintain the ideal growing condition for plants. These environmental systems that should be included in greenhouse planning are heating, air circulation, ventilation, cooling, controllers and automation, water and lighting systems.

Building a greenhouse can prove to be demanding and challenging. Complete knowledge about greenhouse is needed for you to be able to build a productive structure. A considerable amount of time is needed to make a good plan which should cover all aspects. It pays to learn and scout for different options before making your final decision.

Choose The Right Greenhouse Panels

The material of your greenhouse is a very significant factor in terms of heat transfer and the heat it can retain, durability, and the cost in keeping maintaining a warm greenhouse temperature all throughout the winter months.

There are many materials that are used as greenhouse panels that are available in the market that you can choose from, such as glass, polythene plastic, fiberglass, and polycarbonate are a few of the common and most popular materials today.

Each material type works well as each also has its individual strong and weak points. Certainly, some panels suit better the budget of the hobbyist’s.

When deciding on a panel for your hobby greenhouse you have to consider the following:

• The amount of light that can be transmitted.

• The toughness of climate in your area (some can be very windy).

• Easy installation.

• Easy to maintain.

• Decrease light transfer as the panel ages.

• How much heat it can hold.

• Durability and estimated life of the panel until the need of replacement.

• Price.

• Endurance to heavy rain and strong wind; tearing or breakage.

• Weight.

• Flammability.

Fiberglass, glass and polycarbonates, are excellent choices for one who is into a greenhouse hobby. Plastic panels are commonly used in commercial large greenhouses although they are not very durable and entail frequent replacing.

Glass, the traditional greenhouse paneling has a very pleasing appearance, can be easily and reasonably maintained and has high level of permanency. When one is really concerned about the look of the greenhouse, then glass can be a good choice for paneling.

Glass permits large amounts of light to pass through, in fact amongst all paneling, it is glass that can transmit light effectively, and however, it can break easily.

If you choose to use glass, just make certain that your greenhouse framing and foundation should really be strong, as glass can be heavy. An aluminum framing is best when using glass, although it can be expensive to keep the greenhouse warm as aluminum absorbs the cold during winter.

The drawback of using glass for paneling is that glass is a breakable material, initially very expensive to construct, needs a very strong framing and foundation to support its rigidity and heaviness.

Polycarbonate, although not as attractive as glass, yet it is much more durable. It likewise can not let in as compared to glass; however sunlight that passes through this material is less slightly concentrated so that plants will not catch the intense sunlight and heat that a glass greenhouses permits. To reduce the cost of heating, double or even triple polycarbonate paneling sheets can work excellently for retaining in the heat.

Fiberglass is a strong, lightweight and essentially hail-proof paneling material. However, you should use good quality fiberglass since poor grades can discolor as well reduce penetration of light overtime. Likewise, you need to use clear and transparent types only. Tedlar-coated quality fiberglass can lasts up to 20 years.

The resin coating that the glass fibers have eventually will wear off, permitting dirt to be deposited in the fibers. Therefore, after about 15 years, there is a need to put on a new resin coating. The penetration of light can be initially compared to glass, although as it ages, it will considerably drop off especially when you use poor quality fiberglass. Double-layered rigid plastic paneling sheets of polycarbonate or acrylic are available for heat-saving and long-life, covers.

These types of paneling have two coatings of rigid or bendable plastic whish are divided by webs. This double-layer type of material maintains more heat, therefore on can save energy of up to 30 percent.

The acrylic paneling is a long lasting, does not discolor; the polycarbonate generally turns yellow faster, yet typically is shielded by a “UV-inhibitor” covering on the surface that is exposed to sun and rain. Both paneling do carry warranties on light transmission characteristics for up to10 years. And both are ideal for curved surfaces, but polycarbonate paneling is the most bendable paneling material.

Just keep in mind that the best panel material for your greenhouse is the one that suits your needs and style and of course, your budget. Just purchase the best one you can afford.

Greenhouse Misting Systems

Greenhouses have become important tools in plant cultivation. They provide much needed growing rooms for places which are not very conducive for the development of certain plants. They allow the cultivation of plants in places which could grow these plants normally. Since it is easy to find a greenhouse for sale and put it together with a kit, more and more inovations are being used to keep the growing season as long as possible

There are many factors which can affect the development of plants inside a greenhouse. The proper balance of air circulation, ventilation, humidity, shading and heating will provide the plants with an optimum environment.

Greenhouse Misting

Other factors will such as ventilation and shading, are important for prevention of overheating in the greenhouse. However, proper misting or the control of humidity is the main factor which maintains a comfortable environment for the cultivation of plants. Evaporation uses up heat when it turns water from liquid into a gas. When the venting process is done, much needed moisture is lost from the greenhouse because it escapes into the air. Misting is one of the ways to replace the lost moisture inside the greenhouse.

The amount of moisture which is needed to be maintained by the greenhouse is dependent on several factors such as the amount of shading and ventilation that is provided, the status of the local climate and the fluctuations in the daily weather. The rule of thumb is that for each 10 square-ft of area, there must be 1-2 gallons/hour of moisture. A misting system will effectively distribute moisture evenly to all the parts of the greenhouse. A good misting system can disperse water in a fine mist, this will prevent the plants from being soaked.

Misting systems reduce temperatures by as much as twenty-five degrees F which is about 14 degrees Celsius.

Here are some facts about misting systems

-Misting systems can be used to disperse water in an ultra fine mist or a very coarse spray. The size of the droplets can depend on the nozzle type, the spacing of the nozzle and the operating pressure.

-Misting systems are used for many different kinds of applications aside from its normal greenhouse chores. They can be used from dust suppression, controlling static electricity control and concrete curing.

-Misting systems utilize pumps which are designed for intermittent or continuous duty. Intermittent pumps are designed to sprinkle water for five minutes and rest for a minute in between misting.

-Misting systems now come with electronic timers which can be programmed to mist 1-14 times a day with each misting ranging from 1 minute to 24 minutes. Other systems can be programmed to mist in shorter durations but more often.

-Nozzles are made from brass or plastic materials. The brass nozzles can be easily affected by minerals that abound in the water supply. The plastic nozzles can tolerate these minerals and can actually repel lime and other deposits.

-The amount of water which is needed to maximize the efficiency of the misting system can be calculated by multiplying the rate of the nozzle flow per minute by the number of nozzles in the system and the result will then be multiplied again by the minutes that the misting system will be in operation each day. This result will be a good estimate of how much water is needed by the system.

-Most misting systems today offer pumps which are almost noise-free. They will not affect the plants and especially the people near the greenhouse.

-Misting systems can be supplemented by an evaporative cooler. They work very well in dry climates (where humidity is below 50%). The air is cooled by around 10-20 degrees by the water which is evaporated because they are drawn through the cooler and then into the greenhouse. Too much humidity can be a problem and this is why people should water the plant only when they need it.

-The use of tools which can measure humidity can also be very helpful for greenhouse enthusiasts.

There are other factors that need to be considered in greenhouse plant cultivation. Misting is just one of them. Misting provides the plants with much needed cooling for the plants. There are many tools out there that are available for greenhouse plant cultivations which can immensely increase the quality of their greenhouses especially in terms of misting. A cultivator just needs to find out what kind of misting system should be employed for his plants.